| MTF serie - small tube furnaces |
 MTF-Serie, small tube furnaces These models utilise a resistance wire heating element, which is wound around the outside of a ceramic worktube making it an integral part of the heating element. If the tube is required to contain an atmosphere or is likely to be contaminated by spillage, an additional work tube should be used. The thermocouple is located in a protected position between the outside of the work tube and the heating element, allowing the full work tube diameter to be used and protects the thermocouple from mechanical damage. Optional temp. programer available. Maximum operating temperatures of 900°C, 1000°C and 1200°C. Tube diameters range from 15 - 38mm . Heated lengths from 130 - 400mm. These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity. Rapid heat up to operating temperature. Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals. The thermocouple is located in a protected position between the outside of the worktube & heating element, allowing the full worktube diameter to be used. Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box. Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions.
34 (net 29) kg | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
