Applications

Send message

Interspec 301-X Portable spectrometer

Interspec_301-X_low

 

The Interspec 301-X series of FTIR portable spectrometers represent a low cost Fourier transform infrared and near infrared portable spectrometers and employ a number of unique features that ensure high performance from a compact instrument. The Interspec 301-X measures just 49 X 39 X 20 cm and is regarded as one of compact and versatile infrared FTIR spectrophotometers. The design of the 301-X is unique both in terms of optical design and the software and firmware designed specifically to significantly reduce overall analytical times.

 

The optical interferometer geometry is employing a new compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional type optical interferometers. The Interspec 301-X design avoids the use of conventional corner cube optics and dynamic alignment. In practice this means that the instrument can be used in the research laboratory, in any university or college environment and if required, can also be used outside laboratory or in remote locations.

Detector Options

The standard IR detector is a selected high sensitivity DLATGS pyroelectric design providing the highest possible signal to noise for all but the most demanding applications. However there are many applications in infrared spectroscopy where high resolution analysis is required for materials with high absorption characteristics and for these applications cryogenically cooled MCT detector options are available each with a specific wavelength range. In case of NIR spectral region two types of photodiodes are available: Si and InGaAs.

 

Specifications

Wavelength range IR7000 to 400 cm-1 (without ATR accessory)
Wavelength range NIR15000 to 3850 cm-1
Resolution, standard2 cm-1 (8 cm-1 - NIR)
Resolution, option 1.0 or 0.5 cm-1
InterferometerSelf aligning
Beam diameter30 mm
Aperture ratio f 3.2
Beam-splitter, standard IRMulticoated KBr
Beam-splitter, option ZnSe, CaF2, CsI
Beam-splitter, standard NIRFused Silica
Frequency referenceHeNe laser
Sample chamberOpen optical path geometry,
optical axis 63.5 mm above the baseplate,
wide 200 mm
Beam at sample10 mm dia.
Accessoriescompatible with all of your favorite accessories
IR sourceHigh intensity air cooled
NIR sourceQuartz-halogen lamp
Detector IRlow noise DLATGS
Detector NIRSi, InGaAs photodiode
Desiccant possibilityYes
Operating system Windows 98/XP
Power90-230 VAC, 12 VDC, 40 W
Dimensions49x39x20 cm
Weight 18 kg
Temp. environment 15 - 28oC
Humidity environmentBest below 65%
SofwareInterspec For Windows
ModelsInterspec 301-X - Standard FTIR Portable Instrument with KBr optics.
Interspec 301-XZ - Non Water Sensitive FTIR Portable Instruments for High Humidity with ZnSe optics.
Interspec 301-XN - Near Infra Red Portable Instrument with fused silica optics.
 
alt

This specification can be changed without prior notice


EnviSense | portable spectrometer | FTIR/FT-NIR spectrometers |Interspec 301-X| | Spectrometers | portable FTIR spectrometer | Interspec 301 FTIR |

 
© EnviSense - All rights reserved
Design by vonfio.de